Fast, Reliable Roof Replacement & Installation Across Broadview Heights
A full roof replacement in Broadview Heights typically runs $12,000-$28,000 depending on size and materials, with most asphalt shingle jobs completed in two to three days and metal roofing in four to five. We’re on Ridge Road in twenty minutes from most Broadview Heights neighborhoods, and we’ve been replacing roofs here since 1984 - long enough to know every variation of the 1968-1995 housing stock that defines this city. Call (844) 563-1816 and a live person will answer, day or night.
Broadview Heights sits on an elevated ridge in southern Cuyahoga County, with housing stock built mostly between 1968 and 1995, meaning most homes have roofs 30-50 years old with undersized original attic ventilation and no ice-and-water shield at eaves - a combination that makes ice dam damage and rotted decking the defining problem here. We’ve replaced hundreds of these roofs. We know what we’ll find when we pull the shingles, and we know how to fix it so it stays fixed.
Why Ridgeline Roofing Co. Is Broadview Heights’s Preferred Roof Replacement & Installation Company
We’ve been working in Broadview Heights since the mid-1980s, back when the city’s second wave of development was still finishing out near the Brecksville border. Our crews have replaced roofs on Wallings Road, Royalton Road, and the winding streets off Broadview Center - we know the plateau’s wind exposure, the lake-effect snow loads, and the pre-code construction norms that show up in nearly every attic we enter.
Our customers here tend to be longtime homeowners, not flippers. They remember the last contractor who ghosted them after a storm. That’s why we back every job with our written 90-Day Done Right Promise - if it’s not right, we come back and make it right, no paperwork, no arguing. Pete Navarro started this company in 1984 on that principle, and we haven’t changed it.
A live person answers our phones 24 hours a day, seven days a week. Not a voicemail tree, not a callback window. When a February ice dam has water running down your kitchen wall at 11 p.m., someone picks up.
Our technicians are background-checked and uniformed. They photograph every roof inspection from your actual shingles, not the driveway. And our pricing is upfront - the number on the estimate is the number on the invoice. A square deal: the price we quote is the price you pay.
Our Roof Replacement & Installation Services in Broadview Heights
Full Roof Replacement
Most Broadview Heights homes need full replacement, not repair. The 3-tab shingles installed in the 1970s, 80s, and 90s have reached or exceeded their rated lifespan, and the freeze-thaw cycling on this ridge has accelerated granule loss and curling. We strip to the deck, replace rotted OSB or plank decking (inevitable at the eaves), install proper ice-and-water shield, and ventilate the attic to modern standards. Most full replacements in Broadview Heights take two to three days for asphalt shingle systems.
New Construction Roofing
While Broadview Heights is largely built out, we handle new construction and major additions in the city’s remaining infill lots and teardown-rebuild projects near the Brecksville border. We spec GAF or CertainTeed systems with proper ridge vent from day one - no undersized soffit airflow, no shortcuts that create the same problems the 1970s stock faces now.
Asphalt Shingle Installation
Asphalt remains the practical choice for most Broadview Heights ranches, bi-levels, and colonials. We install Owens Corning Duration, GAF Timberline HDZ, and CertainTeed Landmark lines - all with full ice-and-water shield at eaves and valleys, which the original roofs here never had. A typical asphalt shingle replacement on a 1,800-square-foot Broadview Heights ranch runs $12,000-$18,000. Larger colonials with complex valleys can reach $22,000-$28,000.
Metal Roofing
Metal roofing is gaining traction in Broadview Heights for homeowners who’ve fought ice dams once too often. Standing-seam metal sheds snow faster than asphalt and eliminates the freeze-thaw penetration that destroys eave decking. A metal roof on a typical Broadview Heights bi-level runs $22,000-$38,000 - higher upfront, but with a 40-70 year lifespan and measurable energy savings in summer. We install Galvalume and aluminum systems from Atlas and Tamko.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Heights
We are authorized installers for GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral - seven manufacturer lines, no substitutions. For Broadview Heights customers, this means we stock the specific shingle colors and accessory profiles that match the area’s established neighborhoods, and we can source ridge caps, drip edge, and ice-and-water shield without the delays that slow down out-of-town crews. We recently replaced a 1974 bi-level on Meadow Drive where the original 3-tab shingles had failed at the ridge, and when we pulled them we found rotted OSB in the first 18 inches above the fascia on every eave - exactly the pre-code issue our Broadview Heights clients face. We installed Owens Corning Duration shingles with full ice-and-water shield on that entire eave section and added ridge vent to fix the undersized soffit airflow that had accelerated the original shingles’ aging.
Common Roof Replacement & Installation Problems We See in Broadview Heights Homes
- Ice dam damage at eaves. The freeze-thaw cycling on Broadview Heights’s elevated ridge creates ice dams that back water under shingles. Without ice-and-water shield - standard on pre-1995 homes here - the decking rots in the first 18 inches above the fascia. We find this on nearly every tear-off.
- Premature shingle failure from inadequate ventilation. The 1970s-80s ranches and colonials were built with soffit vents too small to support ridge airflow. Attic heat builds, shingles curl and lose granules years before their rated life. Adding ridge vent during replacement fixes the root cause.
- Wind uplift at ridge caps. Streets on the plateau’s higher elevations, like Wallings and Royalton Roads, see sustained winds stronger than lower-lying Parma. Older homes with four-nail shingle patterns instead of six lose ridge caps and field shingles in spring storms.
- Hidden deck rot under “repairable” roofs. Homeowners sometimes ask us to patch a few bad shingles. On a 1985 colonial, that’s rarely the full story. The decking beneath is often spongy at the eaves, and a patch leaves the rot spreading. We photograph everything and show you before we quote.
Pricing for Roof Replacement & Installation in Broadview Heights, OH
Here’s what we see in the Broadview Heights market right now:
| Service | Typical Range |
|---|---|
| Asphalt shingle replacement, 1,500-2,000 sq ft ranch/bi-level | $12,000-$18,000 |
| Asphalt shingle replacement, 2,500+ sq ft colonial with valleys | $22,000-$28,000 |
| Standing-seam metal roof, typical bi-level | $22,000-$38,000 |
| Decking replacement (per sheet, when rotted) | $85-$140 |
| Ice-and-water shield upgrade (full eaves/valleys) | $1,200-$2,400 |
| Ridge vent installation (linear foot) | $18-$28 |
These ranges reflect real jobs we’ve completed in 44147 and nearby. Your exact price depends on roof pitch, accessibility, layers to strip, and how much decking needs replacement - which we can’t know until we inspect. Estimates are free. Call (844) 563-1816 to schedule.
We also offer a permanent 5% Senior and Veteran discount, and our $89 Seasonal Tune-Up catches problems before they require full replacement.
We Also Serve Cities Near Broadview Heights
Our crews work daily in Broadview Heights and the surrounding communities - Brecksville to the south, North Royalton to the west, Independence to the north, and Seven Hills to the northeast. If you’re near the border, we can be there fast. Our Roof Replacement & Installation team covers all of southern Cuyahoga County with the same 24/7 live answer and photo-documented inspections.
Serving Broadview Heights, OH - Our Local Coverage Area
We’re based in the Broadview Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roof Replacement & Installation in Broadview Heights
Because the 1968-1995 housing stock was built before ice-and-water shield was code at the eaves, and the city’s freeze-thaw cycling drives water under shingles repeatedly. The original single layer of felt paper doesn’t stop it. Once moisture hits the OSB or plank decking, rot follows in the first 18 inches above the fascia. We replace it with proper ice-and-water shield on every job. Call (844) 563-1816 for a free inspection - we’ll show you photos from your actual roof.
Yes. The original soffit ventilation on Fox Run ranches is almost always undersized by modern standards. Without ridge vent to create continuous airflow, attic heat builds and shingle life drops by a third. We install ridge vent on every full replacement in Broadview Heights unless the roof geometry absolutely prevents it. The upgrade pays for itself in extended shingle life.
Replace. Curling 3-tab shingles past 30 years mean the asphalt mat is failing, and patching leaves the underlying deck rot unaddressed. On Pheasant Run colonials, we almost always find spongy decking at the eaves once we strip. A patch buys months, not years, and costs nearly as much as addressing the real problem. We’ll inspect and photograph the deck condition before you decide.
Yes. Broadview Heights requires a building permit for full roof replacement, and the city inspects for proper ice-and-water shield and ventilation - standards that many pre-1995 homes don’t meet. We pull permits as part of every job, schedule inspections, and meet the inspector on site. You don’t handle the paperwork.
Metal roofing is one of the most effective solutions for ice dam-prone homes in Broadview Heights. The smooth surface sheds snow before it can melt and refreeze at the eave, and standing-seam systems eliminate the shingle gaps where water penetrates. A metal roof on a bi-level runs $22,000-$38,000 in this market, with 40-70 year lifespan. It’s not the cheapest option. It is the one you won’t replace again. Call (844) 563-1816 to discuss whether metal fits your budget and how long you plan to stay in the home.
Written by Pete Navarro, Owner at Ridgeline Roofing Co., serving Broadview Heights since 1984.